Finishing Equipment

Write a definition of finishing equipment with important keywords.

3D Color

SLS And MultiJetFusion Parts Dyeing Machine

Developed by a large distributor of HP MJF 3D printers, in response of requests to dye the 3D printed parts in black, the 3DColor dyes very easily the parts printed in 3D in PA 12, PA 11, etc...

Thanks to its touch screen and its wide range of pre-programmed shades, the machine can dye up to 2 kgs of parts in one go, in its 78 litre tank.
They come out with a uniform color quality, and dyed up to 200µm deep, without affecting the properties of the parts.

3D Polish

SLS And MJP Polishing Machine

Ideal for  SLS 3D printers users, this fast surface treatment system improves the surface conditions of parts, resistance to wear and shine.

The 3D Polish is equipped with a separator capable of removing impurities and special table dust, reducing waste, improving the use rate of the material and reducing costs.
Large and complex parts can be processed manually and small batches can be processed automatically, as needed.

3DHP Clean

SLS And MultijetFusion (MJP) Parts Cleaning Machine

Once the parts are printed by powder sintering, the 3DHPClean machine will eliminate unnecessary powders lodged or stuck in the pieces. This automatic process divides by 3 or 4 the time of manual sand, able to process parts in batches.
Large and complex parts can be processed manually and small batches can be processed automatically, as needed.

FOR MORE INFORMATION PLEASE CONTACT US